OBD-II · Silnik i układ napędowy (P)
P0316
Misfire detected on startup (first 1000 revolutions)
Co oznacza
The ECU detected misfires during the first 1,000 crankshaft revolutions after the engine started, usually on a cold start.
Objawy
- rough, shaky running for the first seconds or minutes after a cold start
- engine warning light
- sometimes a slight fuel smell at start-up
Prawdopodobne przyczyny, od najczęstszej
| No. | Przyczyna |
|---|---|
| 01 | worn or fouled spark plugs, especially on cars used for short trips |
| 02 | ignition coil that fails when cold or damp |
| 03 | leaking injector flooding a cylinder while the car is parked |
| 04 | fuel pressure bleeding down after switch-off |
| 05 | carbon deposits on intake valves (direct-injection petrol engines) |
| 06 | low compression on one cylinder |
Co sprawdzić, krok po kroku
- 01Check for other misfire codes (P0301-P0306) that point to a specific cylinder
- 02Inspect the spark plugs for fouling and replace if due
- 03Test the ignition coils, including in cold and damp conditions
- 04Check that fuel pressure holds after the engine is switched off (leaking injector or check valve)
- 05Do a compression test if the misfire stays on one cylinder